Scientists a step closer to understanding 'natural antifreeze' molecules

Scientists a step closer to understanding 'natural antifreeze' molecules

  8:17:00 PM    Science Lover

---

Scientists have made an important step forward in their understanding of cryoprotectants – compounds that act as natural 'antifreeze' to protect drugs, food and tissues stored at sub-zero temperatures.

Researchers from the Universities of Leeds and Illinois, and Columbia University in New York, studied a particular type of cryoprotectants known as osmolytes. They found that small osmolyte molecules are better at protecting proteins than larger ones.

The findings, published in Proceedings of the National Academy of Sciences, could help scientists develop better storage techniques for a range of materials, including human reproductive tissue used in IVF.

Biological systems can usually only operate within a small range of temperatures. If they get too hot or too cold, the molecules within the system can become damaged (denatured), which affects their structure and stops them from functioning.

But certain species of fish, reptiles and amphibians can survive for months below freezing by entering into a kind of suspended animation. They are able to survive these extreme conditions thanks to osmolytes – small molecules within their blood that act like antifreeze –preventing damage to their vital organs.

These properties have made osmolytes attractive to scientists. They are used widely in the storage and testing of drugs and other pharmaceuticals; in food production; and to store human tissue like egg and sperm cells at very low temperatures (below ��ºC) for a long period of time.

"If you put something like human tissue straight in the freezer, ice crystals start to grow in the freezing water and solutes – solid particles dissolved in the water – get forced out into the remaining liquid.

This can result in unwanted high concentrations of solutes, such as salt, which can be very damaging to the tissue," said Dr Lorna Dougan from the University of Leeds, who led the study. "The addition of cryoprotectants, such as glycerol, lowers the freezing temperature of water and prevents crystallisation by producing a 'syrupy' semi-solid state. The challenge is to know which cryoprotectant molecule to use and how much of it is necessary.



"We want to get this right so that we recover as much of the biological material as possible after re-thawing. This has massive cost implications, particularly for the pharmaceutical industry because at present they lose a large proportion of their viable drug every time they freeze it."

Dr Dougan and her team tested a range of different osmolytes to find out which ones are most effective at protecting the 3D structure of a protein. They used an atomic force microscope to unravel a test protein in a range of different osmolyte environments to find out which ones were most protective. They discovered that smaller molecules, such as glycerol, are more effective than larger ones like sorbitol and sucrose.

Dr Dougan said: "We've been able to show that if you want to really stabilise a protein, it makes sense to use small protecting osmolytes. We hope to use this discovery and future research to develop a simple set of rules that will allow scientists and industry to use the best process parameters for their system and in doing so dramatically increase the amount of material they recover from the freeze-thaw cycle."

Read More

Energy Harvesting: Nanogenerators Grow Strong Enough to Power Small Conventional Electronic Devices

Energy Harvesting: Nanogenerators Grow Strong Enough to Power Small Conventional Electronic Devices

  10:22:00 AM    Science Lover

---

Blinking numbers on a liquid-crystal display (LCD) often indicate that a device's clock needs resetting. But in the laboratory of Zhong Lin Wang at Georgia Tech, the blinking number on a small LCD signals the success of a five-year effort to power conventional electronic devices with nanoscale generators that harvest mechanical energy from the environment using an array of tiny nanowires.

In a new technique for producing nanogenerators,
researchers transfer vertically-aligned nanowires to a 
flexible substrate. (Credit: Courtesy of Zhong Lin Wang)

In this case, the mechanical energy comes from compressing a nanogenerator between two fingers, but it could also come from a heartbeat, the pounding of a hiker's shoe on a trail, the rustling of a shirt, or the vibration of a heavy machine. While these nanogenerators will never produce large amounts of electricity for conventional purposes, they could be used to power nanoscale and microscale devices -- and even to recharge pacemakers or iPods.

Wang's nanogenerators rely on the piezoelectric effect seen in crystalline materials such as zinc oxide, in which an electric charge potential is created when structures made from the material are flexed or compressed. By capturing and combining the charges from millions of these nanoscale zinc oxide wires, Wang and his research team can produce as much as three volts -- and up to 300 nanoamps.

"By simplifying our design, making it more robust and integrating the contributions from many more nanowires, we have successfully boosted the output of our nanogenerator enough to drive devices such as commercial liquid-crystal displays, light-emitting diodes and laser diodes," said Wang, a Regents' professor in Georgia Tech's School of Materials Science and Engineering. "If we can sustain this rate of improvement, we will reach some true applications in healthcare devices, personal electronics, or environmental monitoring."

Recent improvements in the nanogenerators, including a simpler fabrication technique, were reported online last week in the journal Nano Letters. Earlier papers in the same journal and in Nature Communications reported other advances for the work, which has been supported by the Defense Advanced Research Projects Agency (DARPA), the U.S. Department of Energy, the U.S. Air Force, and the National Science Foundation.

"We are interested in very small devices that can be used in applications such as health care, environmental monitoring and personal electronics," said Wang. "How to power these devices is a critical issue."

The earliest zinc oxide nanogenerators used arrays of nanowires grown on a rigid substrate and topped with a metal electrode. Later versions embedded both ends of the nanowires in polymer and produced power by simple flexing. Regardless of the configuration, the devices required careful growth of the nanowire arrays and painstaking assembly.

In the latest paper, Wang and his group members Youfan Hu, Yan Zhang, Chen Xu, Guang Zhu and Zetang Li reported on much simpler fabrication techniques. First, they grew arrays of a new type of nanowire that has a conical shape. These wires were cut from their growth substrate and placed into an alcohol solution.

The solution containing the nanowires was then dripped onto a thin metal electrode and a sheet of flexible polymer film. After the alcohol was allowed to dry, another layer was created. Multiple nanowire/polymer layers were built up into a kind of composite, using a process that Wang believes could be scaled up to industrial production.

When flexed, these nanowire sandwiches -- which are about two centimeters by 1.5 centimeters -- generated enough power to drive a commercial display borrowed from a pocket calculator.

Wang says the nanogenerators are now close to producing enough current for a self-powered system that might monitor the environment for a toxic gas, for instance, then broadcast a warning. The system would include capacitors able to store up the small charges until enough power was available to send out a burst of data.

While even the current nanogenerator output remains below the level required for such devices as iPods or cardiac pacemakers, Wang believes those levels will be reached within three to five years. The current nanogenerator, he notes, is nearly 100 times more powerful than what his group had developed just a year ago.

Writing in a separate paper published in October in the journal Nature Communications, group members Sheng Xu, Benjamin J. Hansen and Wang reported on a new technique for fabricating piezoelectric nanowires from lead zirconate titanate -- also known as PZT. The material is already used industrially, but is difficult to grow because it requires temperatures of 650 degrees Celsius.

In the paper, Wang's team reported the first chemical epitaxial growth of vertically-aligned single-crystal nanowire arrays of PZT on a variety of conductive and non-conductive substrates. They used a process known as hydrothermal decomposition, which took place at just 230 degrees Celsius.

With a rectifying circuit to convert alternating current to direct current, the researchers used the PZT nanogenerators to power a commercial laser diode, demonstrating an alternative materials system for Wang's nanogenerator family. "This allows us the flexibility of choosing the best material and process for the given need, although the performance of PZT is not as good as zinc oxide for power generation," he explained.

And in another paper published in Nano Letters, Wang and group members Guang Zhu, Rusen Yang and Sihong Wang reported on yet another advance boosting nanogenerator output. Their approach, called "scalable sweeping printing," includes a two-step process of (1) transferring vertically-aligned zinc oxide nanowires to a polymer receiving substrate to form horizontal arrays and (2) applying parallel strip electrodes to connect all of the nanowires together.

Using a single layer of this structure, the researchers produced an open-circuit voltage of 2.03 volts and a peak output power density of approximately 11 milliwatts per cubic centimeter.

"From when we got started in 2005 until today, we have dramatically improved the output of our nanogenerators," Wang noted. "We are within the range of what's needed. If we can drive these small components, I believe we will be able to power small systems in the near future. In the next five years, I hope to see this move into application."

Read More