BTemplates.com

Powered by Blogger.

Pageviews past week

Quantum mechanics

Auto News

artificial intelligence

About Me

Recommend us on Google!

Information Technology

Popular Posts

Showing posts with label Quantum mechanics. Show all posts
Showing posts with label Quantum mechanics. Show all posts

Tuesday, August 16, 2011

Searching for Spin Liquids: Much-Sought Exotic Quantum State of Matter Can Exist


The world economy is becoming ever more reliant on high tech electronics such as computers featuring fingernail-sized microprocessors crammed with billions of transistors. For progress to continue, for Moore's Law -- according to which the number of computer components crammed onto microchips doubles every two years, even as the size and cost of components halves -- to continue, new materials and new phenomena need to be discovered.
Diagram depicting anti-ferromagnetic order (upper) compared to a spin liquid phase (lower). In an anti-ferromagnet, the spins are anti-aligned. A spin liquid has no order and the spins can be viewed as bobbing about like water molecules in liquid water. (Credit: E. Edwards)

Furthermore, as the sizes of electronic components shrink, soon down to the size of single atoms or molecules, quantum interactions become ever more important. Consequently, enhanced knowledge and exploitation of quantum effects is essential. Researchers at the Joint Quantum Institute (JQI) in College Park, Maryland, operated by the University of Maryland and the National Institute of Standards and Technology (NIST), and at Georgetown University have uncovered evidence for a long-sought-after quantum state of matter, a spin liquid.

The research was performed by JQI postdoctoral scientists Christopher Varney and Kai Sun, JQI Fellow Victor Galitski, and Marcos Rigol of Georgetown University. The results appear in an editor-recommended article in the 12 August issue of the journal Physical Review Letters.

You can't pour a spin liquid into a glass. It's not a material at all, at least not a material you can touch. It is more like a kind of magnetic disorder within an ordered array of atoms. Nevertheless, it has many physicists excited.

To understand this exotic state of matter, first consider the concept of spin, which is at the heart of all magnetic phenomena. For instance, a refrigerator magnet, at the microscopic level, consists of trillions of trillions of iron atoms all lined up. Each of these atoms can be thought of loosely as a tiny spinning ball. The orientation of that spin is what makes the atom into a tiny magnet. The refrigerator magnet is an example of a ferromagnet, the ferro part coming from the Latin word for iron. In a ferromagnet, all the atomic spins are lined up in the same way, producing a large cooperative magnetic effect.

Important though they may be, ferromagnets aren't the only kind of material where magnetic interactions between spins are critical. In anti-ferromagnets, for instance, the neighboring spins are driven to be anti-aligned. That is, the orientations of the spins alternate up and down (see top picture in figure). The accumulative magnetic effect of all these up and down spins is that the material has no net magnetism. The high-temperature superconducting materials discovered in the 1980s are an important example of an anti-ferromagnetic structure.

More complicated and potentially interesting magnetic arrangements are possible, which may lead to a quantum spin liquid. Imagine an equilateral triangle, with an atom (spin) at each corner. Anti-ferromagnetism in such a geometry would meet with difficulties. Suppose that one spin points up while a second spin points down. So far, so good. But what spin orientation can the third atom take? It can't simultaneously anti-align with both of the other atoms in the triangle. Physicists employ the word "frustration" to describe this baffling condition where all demands cannot be satisfied.

In everyday life frustration is, well, frustrating, and actually this condition is found throughout nature, from magnetism to neural networks. Furthermore, understanding the different manifestations of a collection of magnetically interacting spins might help in designing new types of electronic circuitry.

One compromise that a frustrated spin system makes is to simultaneously exist in many spin orientations. In a quantum system, this simultaneous existence, or superposition, is allowed.

Here's where the JQI researchers have tried something new. They have studied what happens when frustration occurs in materials with a hexagonal (six sided) unit cell lattice.

What these atoms do is interact via their respective spins. The strength of the interaction between nearest neighbor (NN) atoms is denoted by the parameter J1. Similarly, the force between next nearest neighbors (NNN) -- that is, pairs of atoms that have at least one intervening atom between them -- is denoted by J2. Letting this batch of atoms interact among themselves, even on a pretend lattice as small as this, entails an immense calculation. Varney and his colleagues have calculated what happens in an array of hexagons consisting of 30 sites where the spins are free to swing about in a two-dimensional plane (this kind of approach is called an XY model).



Christopher Varney, who has appointments at Maryland and Georgetown, said that the interactions of atoms can be represented by a matrix (essentially a two-dimensional spreadsheet) with 155 million entries on each side. This huge number corresponds to the different spin configurations that can occur on this honeycomb-structured material.

What the researchers found were a "kaleidoscope" of phases, which represent the lowest-energy states that are allowed given the magnetic interactions. Just as water can exist in different phases -- steam, liquid, and ice -- as the temperature is changed, so here a change in the strengths of the interactions among the spins (the J1 and J2 parameters) results in different phases. For example, one simple solution is an antiferromagnet (upper picture in figure).

But one phase turns out to be a true quantum spin liquid having no order at all. When J2 is between about 21% and 36% of the value of J1, frustration coaxes the spins into disorder; the entire sample co-exists in millions of quantum states simultaneously.

It's difficult for the human mind to picture a tiny two-dimensional material in so many states at the same time. JQI fellow, Victor Galitski, suggests that one shouldn't think of the spins as residing at the original atomic sites but rather as free ranging particle-like entities dubbed "spinons." These spinons bob about, just as water molecules bob about in liquid water (see lower picture in figure). Hence the name quantum spin liquid.

Another reason for using the word liquid, Galitski says, is this 'bobbing about' is analogous to what happens inside a metal. There, the outer electrons of most atoms tend to leave their home atoms and drift through the metal sample as if they constituted a fluid, called a "Fermi liquid."

Electrons in a metal are able to drift since it takes only an infinitesimal amount of energy to put them into motion. The same is true for the fluctuating spins in the hexagonal model studied by the JQI scientists. Indeed, their spin model assumes a temperature of absolute zero, where quantum effects abound.

Writing in an essay that accompanied the article in Physical Review Letters, Tameem Albash and Stephan Haas, scientists at the University of Southern California, say that the JQI/Georgetown team "present a convincing example" of the new spin liquid state.

How can this new frustration calculation be tested? The experimental verification of the spin liquid state in a 2-dimenstional hexagonal lattice, Albash and Haas suggest, "will probably be tested using cold atoms trapped in optical lattices. In the past few years, this technology has become a reliable tool to emulate quantum many body lattice systems with tunable interactions." Indeed the authors propose such an experiment.

What would such a spin liquid material be good for? It's too early to tell. But some speculations include the idea that these materials could support some exotic kind of superconductivity or would organize particle-like entities that possessed fractional electric charge.

"Kaleidoscope of Exotic Quantum Phases in a Frustrated XY Model" by Christopher N. Varney, Kai Sun, Victor Galitski, and Marcos Rigol, Physical Review Letters, 107, 077201, (12 August 2011).

Tuesday, July 19, 2011

Physicists take steps toward delivering quantum information to the home


Today, fiber optics technology transports information in the form of classical data to homes and businesses. But researchers are currently working on ways to combine quantum data with the classical data in fiber optics networks in order to increase security. In a new study, scientists have shown how quantum and classical data can be interlaced in a real-world fiber optics network, taking a step toward distributing quantum information to the home, and with it a quantum internet.
A tree network is often used to distribute classical data to homes via fiber optics. Researchers are working on co-propagating quantum information with the classical data to improve security. Image copyright: Iris Choi, et al. ©2011 IOP Publishing Ltd and Deutsche Physikalische Gesellschaft

The physicists, Iris Choi, Robert J. Young, and Paul D. Townsend, from the Tyndall National Institute at the University College Cork in Cork, Ireland, have published their study on combining quantum and classical signals in a recent issue of the New Journal of Physics. While the feasibility of transferring qubits on modern fiber-to-the-home (FTTH) networks has previously been demonstrated, this is the first time that researchers have investigated how the operation would work in a real-world network.

“I believe that our work constitutes the first really hard-nosed, pragmatic attempt to address the question of whether quantum key distribution (QKD) can work on a real fiber-to-the-home (FTTH) network,” Townsend told PhysOrg.com. “The new scheme that we have developed and tested demonstrates that the answer is ‘yes it can.’ I say pragmatic and hard-nosed because we have taken a widely deployed classical FTTH system and have adapted QKD to interwork with it, leaving the design of the classical part of the system essentially unchanged. The alternative approach, sometimes taken in QKD research, is to leave out the classical system completely or to adapt it to work with the QKD. In our view this is not very practical for cost reasons.”

The biggest challenge in transferring qubits in real-world networks is overcoming the crosstalk between the classical and quantum channels. Crosstalk is induced by spontaneous Raman scattering of photons in the optical fiber. Since the classical channels involve strong laser pulses while the quantum information is carried by single photons, the crosstalk primarily affects the quantum channel, making the error rate so high that the quantum channel is unable to operate.



Previous research has shown that the Raman noise level can be reduced by optical filtering, although this technique is too expensive for practical use. So Choi, Young, and Townsend have developed and demonstrated a novel noise suppression scheme that involves creating gaps in the scattering, and sending quantum data in these gaps.

First, the researchers chose a configuration that used two different wavelengths for transmitting the quantum and classical channels. In this configuration, only the Raman-scattered light in the “upstream” channel (going away from a user’s house) can generate crosstalk for that user. Then, the researchers identified quiet periods between the bursts of noise generated by Raman scattering in the upstream channel. Using a time and wavelength-multiplexing scheme, the researchers demonstrated that quantum data generated by a quantum key distribution (QKD) scheme can be transmitted during these quiet periods with high fidelity.

While building a purely quantum network could avoid the problem of crosstalk altogether, the researchers explain that combining quantum channels with classical channels is by far the more practical option.

“I see this as an absolute requirement – a ‘must have,’ Townsend said. “That’s because optical fiber network infrastructure is enormously expensive to deploy, so it must last for a long time – perhaps 25 years or more – and be able to support a wide range of current and future, yet to be defined, systems and services. So it is extremely unlikely that an operator would ever deploy a network, or even dedicate fibers within an existing network, purely for quantum communications – it’s just too expensive to do so. Consequently, we have to develop techniques that enable classical and quantum channels to work together on the same network if we want quantum communication systems to become a practical reality.”

By demonstrating that both quantum and classical information can be transmitted on a single optical fiber network in a way that satisfies real-world requirements, the researchers hope to bring quantum information technology one step closer to commercial applications.

“As we have demonstrated, in principle the technology to do this is available now,” Townsend. “However, in reality further research is likely to be required to reduce the cost and improve the performance of certain key parts of the system such as the single photon detectors, before widespread applications emerge. In general, the ‘value proposition’ for QKD on FTTH and other networks is under intensive discussion today, but at the moment no clear consensus has emerged concerning if and when it might be adopted to replace classical encryption techniques. However, as demonstrated by this research, the QKD field is not standing still and systems are continuing to evolve to become more practical, improving the potential for adoption of the technology in the future.”

More information: Iris Choi, et al. “Quantum information to the home.” New Journal of Physics 13 (2011) 063039 DOI:10.1088/1367-2630/13/6/063039

Thursday, July 7, 2011

Mechanical micro-drum cooled to quantum ground state


Showcasing new tools for widespread development of quantum circuits made of mechanical parts, scientists from the National Institute of Standards and Technology have demonstrated a flexible, broadly usable technique for steadily calming the vibrations of an engineered mechanical object down to the quantum "ground state," the lowest possible energy level.
Multiple versions of NIST's superconducting circuit containing a "micro drum" were fabricated on this sapphire chip, shown next to a penny for scale. NIST scientists cooled one such drum to the lowest possible energy level, the quantum ground state. Credit: Teufel/NIST

Described in a Nature paper posted online July 6, the NIST experiments nearly stop the beating motion of a microscopic aluminum drum made of about 1 trillion atoms, placing the drum in a realm governed by quantum mechanics with its energy below a single quantum, or one unit of energy. Like a plucked guitar string that plays the same tone while the sound dissipates, the drum continues to beat 11 million times per second, but its range of motion approaches zero. The cooling technique and drum device together promise new machinery for quantum computing and tests of quantum theory, and could help advance the field of quantum acoustics exploring the quantum nature of mechanical vibrations.

NIST scientists used the pressure of microwave radiation, or light, to calm the motion of the drum, which is embedded in a superconducting circuit. The circuit is designed so that the drum motion can influence the microwaves inside an electromagnetic cavity. The cooling method takes advantage of the microwave light's tendency to change frequency, if necessary, to match the frequency, or tone, at which the cavity naturally resonates.

"I put in the light at the wrong frequency, and it comes out at the right frequency, and it does that by stealing energy from the drum motion," says John Teufel, a NIST research affiliate who designed the drum. Teufel led the cooling experiments in NIST physicist and co-author Konrad Lehnert's lab at JILA, a joint institute of NIST and the University of Colorado Boulder.

Compared to the first engineered object to be coaxed into the quantum ground state, reported by California researchers last year, the NIST drum has a higher quality factor, so it can hold a beat longer, and it beats at a much slower rate, or lower frequency. As a result, individual packets of energy, or quanta, can be stored 10,000 times longer (about 100 microseconds)—long enough to serve as a temporary memory for a quantum computer and a platform for exploring complex mechanical and quantum states. In addition, the drum motion is 40 times greater per quantum, offering the possibility, for instance, of generating larger entangled "cat states"—objects that are in two places at once and also entangled, with properties that are linked even at a distance—for tests of theories such as quantum gravity. The NIST apparatus also allows researchers to measure the position of the drum directly, which is useful for force detection, with a precision closer than ever to the ultimate limit allowed by quantum mechanics.

To make engineered bulk objects obey the rules of quantum mechanics, typically observed only in atoms and smaller particles, scientists must lower an object's temperature beyond the reach of conventional refrigeration. The California researchers were able to use a passive cryogenic refrigeration technique to chill their high-frequency device enough to reach the ground state, avoiding the need for specialized techniques.



NIST's drum required the use of "sideband cooling" to reach much colder temperatures, taking advantage of strong interactions between the drum and the microwaves. This is the same idea as laser cooling of individual atoms, first demonstrated at NIST in 1978. Now a basic tool of atomic physics worldwide, laser cooling enabled many significant advances by allowing researchers to reduce the vibrational motion of trapped atoms to less than a single quantum. Sideband refers to a collection of light particles (photons) just above or below a specific target frequency. In the case of NIST's superconducting circuit, this stray radiation pressure, as it adjusts to the surrounding environment of the cavity, steadily removes energy from the drum motion in the same way that laser cooling slows atoms in a gas.

In the NIST experiments, the drum is first chilled in a cryogenic refrigerator using liquid helium. This lowers the drum energy to about 30 quanta. Sideband cooling then reduces the drum temperature from 20 milliKelvin (thousandths of a degree above absolute zero) to below 400 microKelvin (millionths of a degree above absolute zero), steadily lowering the drum energy to just one-third of 1 quantum.

Scientists begin the sideband cooling process by applying a drive tone to the circuit at a particular frequency below the cavity resonance. The drumbeats generate sideband photons, which naturally convert to the higher frequency of the cavity. These photons leak out of the cavity as it fills up. Each departing photon takes with it one mechanical unit of energy—one phonon—from the drum motion. At a drive intensity that corresponds to 4,000 photons in the cavity, the drum motion slows to less than 1 quantum. By detecting the scattered photons leaving the cavity, scientists can measure the mechanical motion near the lowest possible limits of uncertainty. Collectively, these steps proved that the mechanical drum entered the quantum regime.

The drum apparatus has applications in quantum computers, which could someday solve certain problems that are intractable today, even with the best supercomputers. Quantum information can be stored in the mechanical state for more than 100 microseconds before absorbing one phonon from the environment—much longer than conventional superconducting quantum bits can maintain information. The drum, thus, might serve as a short-term memory device in a superconducting quantum computer circuit, a technology under development by the same NIST research group. In addition, because mechanical oscillators can interact with light of any frequency, they could act as intermediaries for transferring quantum information between microwave and optical components.

More information: J.D. Teufel, T. Donner, Dale Li, J.W. Harlow, M.S. Allman, K. Cicak, A.J. Sirois, J.D. Whittaker, K.W. Lehnert and R.W. Simmonds. 2011. Sideband cooling of micromechanical motion to the quantum ground state. Nature. Posted online July 6.

Thursday, June 30, 2011

Squeezed light from single atoms


Max Planck Institute of Quantum Optics scientists generate amplitude-squeezed light fields using single atoms trapped inside optical cavities.
A single rubidium atom in a cavity squeezes the quantum
fluctuations of a weak laser beam, decreasing the fluctuations
of the amplitude at the expense of the phase.
The effect is exaggerated for clarity.

In classical optics light is usually described as a wave, but at the most fundamental quantum level this wave consists of discrete particles called photons. Over the time, physicists developed many tools to manipulate both the wave-like and the particle-like quantum properties of the light. For instance, they created single photon sources with single atoms, using their ability to absorb and emit photons one by one. A team around Professor Gerhard Rempe, Director at the Max Planck Institute of Quantum Optics (Garching near Munich) and head of the Quantum Dynamics Division, has now observed that the light emitted by a single atom may exhibit much richer dynamics (Nature 474, 623, June 30, 2011). Strongly interacting with light inside a cavity, the atom modifies the wave-like properties of the light field, reducing its amplitude or phase fluctuations below the level allowed for classical electromagnetic radiation. This is the very first observation of “squeezed” light produced by a single atom.

The “graininess” of the photons in a light wave causes small fluctuations of the wave’s amplitude and phase. For classical beams, the minimal amount of amplitude and phase fluctuations is equal. However, by creating interactions between the photons, one can “squeeze” the fluctuations of the amplitude below this so-called “shot noise” level at the expense of increasing the fluctuations of the phase, and vice-versa. Unfortunately, the photonic interactions inside standard optical media are very weak, and require bright light beams to be observed. Single atoms are promising candidates to enable such interactions at a few-photon level. Their ability to generate squeezed light has been predicted 30 years ago, but the amount of light they emit is very tiny and so far all attempts to set this idea into realization have failed. In the Quantum Dynamics Division at MPQ sophisticated methods for cooling, isolating and manipulating single atoms have been developed over many years, and made this observation possible.



A single rubidium atom is trapped inside a cavity made of two very reflective mirrors in a distance of about a tenth of a millimetre from each other. When weak laser light is injected into this cavity, the atom can interact with one photon many times, and forms a kind of artificial molecule with the photons of the light field. As a consequence, two photons can enter the system at the same time and become correlated. “According to the model of Bohr, a single atom emits exactly one single energy quantum, i.e., one photon. That means that the number of photons is exactly known, but the phase of the light is not defined”, Professor Gerhard Rempe explains. “But the two photons that are emitted by this strongly coupled atom are indistinguishable and oscillate together. Therefore this time the wave-like properties of the propagating light field are modified.”

When the physicists use a laser beam which is resonant with the excitation frequency of the atom, the measurements show a suppression of the phase fluctuations. If the laser light is resonant with the cavity, they observe a squeezing of the amplitude instead.

The latter situation is illustrated in the figure: The atom in the cavity turns a laser beam into light which has less amplitude and more phase fluctuations than the shot-noise limit. “Our experiment shows that the light emitted by single atoms is much more complex than in the simple view of Albert Einstein concerning photo-emission”, Dr. Karim Murr emphasizes. “The squeezing that we observe is due to the coherent interaction between the two photons emitted from the system. Our measurement is in excellent agreement with the predictions of quantum electrodynamics in the strong-coupling regime.” And Dr. Alexei Ourjoumtsev, who has been working on the experiment as a post doc, adds: “Usually single quantum objects are used to manipulate the particle-like properties of light. It is interesting to see that they can also modify its wave-like properties, and create observable squeezing with excitations beams containing only two photons on average”.

So far squeezed light has only been generated with systems containing many atoms, such as crystals, using very high intensity beams, i.e. many photons. For the first time now physicists have succeeded in generating this kind of non-classical radiation with single atoms and extremely weak light fields. The ability of a single atom to induce strong coherent interactions between propagating photons opens up new perspectives for photonic quantum logic with single emitters.

More information: A. Ourjoumtsev, A. Kubanek, M. Koch, C. Sames, P. W. H. Pinkse, G. Rempe, & K. Murr

Observation of squeezed light from one atom excited with two photons , Nature 474, 623, 30 June 2011. Provided by Max-Planck-Gesellschaft


Saturday, June 25, 2011

Optical circuit enables new approach to quantum technologies



An international research group led by scientists from the University of Bristol, UK, and the Universities of Osaka and Hokkaido, Japan, has demonstrated a fundamental building block for quantum computing that could soon be employed in a range of quantum technologies.

Professor Jeremy O’Brien, Director of the University of Bristol’s Centre for Quantum Photonics, and his Japanese colleagues have demonstrated a quantum logic gate acting on four particles of light – photons. The researchers believe their device could provide important routes to new quantum technologies, including secure communication, precision measurement, and ultimately a quantum computer—a powerful type of computer that uses quantum bits (qubits) rather than the conventional bits used in today’s computers.

Unlike conventional bits or transistors, which can be in one of only two states at any one time (1 or 0), a qubit can be in several states at the same time and can therefore be used to hold and process a much larger amount of information at a greater rate.

“We have realised a fundamental element for processing quantum information—a controlled-NOT or CNOT gate—based on a recipe that was theoretically proposed 10 years ago,” said Professor O’Brien. “The reason it has taken so long to achieve this milestone is that even for such a relatively simple circuit we require complete control over four single photons whizzing around at the speed of light!”

The approach taken by Professor O’Brien and his colleagues combined several methods for making optical circuits that must be stable to within a fraction of the wavelength of light, that is, nanometres. In 2001 optical quantum computing became possible when a theoretical recipe for realising this CNOT gate, as well as the other necessary components, was developed. However, the technological challenges associated with making the optical circuits have prevented its realisation until now. The implications for this new approach are far-reaching.

“The ability to implement such a logic gate on photons is critical for building up larger scale circuits and even algorithms,” said Professor O’Brien. “Using an integrated optics on a chip approach that we have pioneered here at Bristol over the last several years will enable this to proceed far more rapidly, paving the way to quantum technologies that will help us understand the most complex scientific problems.”



In the short term, the team expect to apply their new results immediately for developing new approaches to quantum communication and measurement and then for simulation tools in their lab. In the longer term, a small-scale quantum simulator based on a multi-photon optical circuit could be used to simulate processes which themselves are governed by quantum mechanics, such as superconductivity and photosynthesis. “Our technique could improve our understanding of such important processes and help, for example, in the development of more efficient solar cells,” said Professor O’Brien. Other applications include the development of ultra-fast and efficient search engines, designing high-tech materials and new pharmaceuticals.

The leap from using one photon to two photons is not trivial because the two particles need to be identical in every way and because of the way these particles interfere, or interact, with each other. There is no direct analogue of this interaction outside of quantum physics.

“Now that we can implement the fundamental building blocks for quantum circuits, the move to a larger scale devices will become our focus. Because of the increasingly complexity the results will be just as exciting” said Professor O’Brien. “Each time we add a photon, the complexity of the problem we are able to investigate increases exponentially, so if a one-photon quantum circuit has 10 outcomes, a two-photon system can give 100 outcomes and a three-photon system 1000 solutions and so on.”

The Centre for Quantum Photonics now plans to use their chip-based approach to increase the complexity of their experiment not only by adding more photons but also by using larger circuits.

The research is published in Proceedings of the National Academy of Sciences.

Friday, June 24, 2011

'Quantum magic' without any 'spooky action at a distance'



The quantum mechanical entanglement is at the heart of the famous quantum teleportation experiment and was referred to by Albert Einstein as "spooky action at a distance". A team of researchers led by Anton Zeilinger at the University of Vienna and the Institute for Quantum Optics and Quantum Information of the Austrian Academy of Sciences used a system which does not allow for entanglement, and still found results which cannot be interpreted classically. Their findings were published in the latest issue of the renowned scientific journal Nature.
The central part of the optical setup used to demonstrate
that even a system which does not allow entanglement
exhibits features commonly attributed to this phenomenon.
Credit: IQOQI; Jacqueline Godany 2011

Asher Peres, a pioneer of quantum information theory once remarked jokingly in a letter to a colleague (Dagmar Bruß): Entanglement is a trick 'quantum magicians' use to produce phenomena that cannot be imitated by 'classical magicians'. When two particles are entangled, measurements performed on one of them immediately affect the other, no matter how far apart the particles are. What if, in an experiment, one considers a system that does not allow for entanglement? Will the quantum magicians still have an advantage over the classical magicians?

Quantum physics beyond magic

This is the question the team of quantum physicists led by Anton Zeilinger from the Faculty of Physics at the University of Vienna and from the IQOQI of the Austrian Academy of Sciences addressed in their experiment. The physicists used a "qutrit" – a quantum system consisting of a single photon that can assume three distinguishable states. "We were able to demonstrate experimentally that quantum mechanical measurements cannot be interpreted in a classical way even when no entanglement is involved," Radek Lapkiewicz explains. The findings relate to the theoretical predictions by John Stewart Bell, Simon B. Kochen, and Ernst Specker.

Quantum world versus everyday life



Quantum physics is in stark contrast with what we perceive and experience in our everyday lives and what we understand as "classical physics". Let us, for example, examine a globe: from a given point of view we can only see one respective hemisphere at any given time. When spinning the globe once around its axis we are able to construct a meaningful and "true" picture of our planet assuming that the shape of the continents stays the same, even when we cannot see them.

Therefore, by means of our experience and the assumptions made in classical physics, we can assign certain properties to a system without actually observing it. This is no longer the case if one pictures a "quantum globe". Contrary to a globe where –due to the assumptions of classical properties– the various pieces fit together as they do in a puzzle, the pictures of the quantum globe do not fit together. Yet the pattern is not random: it is possible to predict by how much the individual parts will differ from each other after an observation.

More information: Experimental non-classicality of an indivisible quantum system, Radek Lapkiewicz, Peizhe Li, Christoph Schaeff, Nathan K. Langford, Sven Ramelow, Marcin Wiesniak and Anton Zeilinger, Nature, June 23, 2011. DOI: 10.1038/nature10119

Provided by University of Vienna

Sunday, April 3, 2011

World First: Calculations With 14 Quantum Bits



Quantum physicists from the University of Innsbruck have set another world record: They have achieved controlled entanglement of 14 quantum bits (qubits) and, thus, realized the largest quantum register that has ever been produced. With this experiment the scientists have not only come closer to the realization of a quantum computer but they also show surprising results for the quantum mechanical phenomenon of entanglement.
Up to 14 quantum bits were entangled in an ion trap. 
(Credit: University of Innsbruck)

The term entanglement was introduced by the Austrian Nobel laureate Erwin Schrödinger in 1935, and it describes a quantum mechanical phenomenon that while it can clearly be demonstrated experimentally, is not understood completely. Entangled particles cannot be defined as single particles with defined states but rather as a whole system. By entangling single quantum bits, a quantum computer will solve problems considerably faster than conventional computers. "It becomes even more difficult to understand entanglement when there are more than two particles involved," says Thomas Monz, junior scientist in the research group led by Rainer Blatt at the Institute for Experimental Physics at the University of Innsbruck. "And now our experiment with many particles provides us with new insights into this phenomenon," adds Blatt.

World record: 14 quantum bits

Since 2005 the research team of Rainer Blatt has held the record for the number of entangled quantum bits realized experimentally. To date, nobody else has been able to achieve controlled entanglement of eight particles, which represents one quantum byte. Now the Innsbruck scientists have almost doubled this record. They confined 14 calcium atoms in an ion trap, which, similar to a quantum computer, they then manipulated with laser light. The internal states of each atom formed single qubits and a quantum register of 14 qubits was produced. This register represents the core of a future quantum computer. In addition, the physicists of the University of Innsbruck have found out that the decay rate of the atoms is not linear, as usually expected, but is proportional to the square of the number of the qubits. When several particles are entangled, the sensitivity of the system increases significantly. "This process is known as superdecoherence and has rarely been observed in quantum processing," explains Thomas Monz. It is not only of importance for building quantum computers but also for the construction of precise atomic clocks or carrying out quantum simulations.

Increasing the number of entangled particles
By now the Innsbruck experimental physicists have succeeded in confining up to 64 particles in an ion trap. "We are not able to entangle this high number of ions yet," says Thomas Monz. "However, our current findings provide us with a better understanding about the behavior of many entangled particles." And this knowledge may soon enable them to entangle even more atoms. Some weeks ago Rainer Blatt's research group reported on another important finding in this context in the scientific journal Nature: They showed that ions might be entangled by electromagnetic coupling. This enables the scientists to link many little quantum registers efficiently on a micro chip. All these findings are important steps to make quantum technologies suitable for practical information processing," Rainer Blatt is convinced.

The results of this work are published in the scientific journal Physical Review Letters. The Innsbruck researchers are supported by the Austrian Science Fund (FWF), the European Commission and the Federation of Austrian Industries Tyrol.

Wednesday, November 17, 2010

Quantum Memory for Communication Networks of the Future


Researchers from the Niels Bohr Institute at the University of Copenhagen have succeeded in storing quantum information using two 'entangled' light beams. Quantum memory or information storage is a necessary element of future quantum communication networks. The new findings are published in Nature Physics.
The illustration shows the two quantum memories. Each 
memory consists of a glass cell filled with caesium atoms, 
which are shown as small blue and red balls. The light 
beam is sent through the atoms and the quantum 
information is thus transferred from the light to the atoms. 
(Credit: Quantop)

Quantum networks will be able to protect the security of information better than the current conventional communication networks. The cornerstone of quantum communication is a phenomenon called entanglement between two quantum systems, for example, two light beams. Entanglement means that the two light beams are connected to each other, so that they have well defined common characteristics, a kind of common knowledge. A quantum state can -- according to the laws of quantum mechanics, not be copied and can therefore be used to transfer data in a secure way.

In professor Eugene Polzik's research group Quantop at the Niels Bohr Institute researchers have now been able to store the two entangled light beams in two quantum memories. The research is conducted in a laboratory where a forest of mirrors and optical elements such as wave plates, beam splitters, lenses etc. are set up on a large table, sending the light around on a more than 10 meter long labyrinthine journey. Using the optical elements, the researchers control the light and regulate the size and intensity to get just the right wavelength and polarisation the light needs to have for the experiment.

The two entangled light beams are created by sending a single blue light beam through a crystal where the blue light beam is split up into two red light beams. The two red light beams are entangled, so they have a common quantum state. The quantum state itself is information.

The two light beams are sent on through the labyrinth of mirrors and optical elements and reach the two memories, which in the experiment are two glass containers filled with a gas of caesium atoms. The atoms' quantum state contains information in the form of a so-called spin, which can be either 'up' or 'down'. It can be compared with computer data, which consists of the digits 0 and 1. When the light beams pass the atoms, the quantum state is transferred from the two light beams to the two memories. The information has thus been stored as the new quantum state in the atoms.

"For the first time such a memory has been demonstrated with a very high degree of reliability. In fact, it is so good that it is impossible to obtain with conventional memory for light that is used in, for example, internet communication. This result means that a quantum network is one step closer to being a reality," explains professor Eugene Polzik.

Tuesday, October 5, 2010

Nobel Prize in Physics 2010 for Graphene -- 'Two-Dimensional' Material


The Royal Swedish Academy of Sciences has awarded the Nobel Prize in Physics for 2010 to Andre Geim and Konstantin Novoselov, both of the University of Manchester, "for groundbreaking experiments regarding the two-dimensional material graphene."
Graphene from graphite: Graphite is a basic material found in nature. When taken apart graphite sheets become graphene. A rolled up layer of graphene forms a carbon nanotube, folded up it becomes a small football, fullerene. Hidden inside graphite, graphene was waiting to be discovered. (Credit: © Airi Iliste/The Royal Swedish Academy of Sciences)

A thin flake of ordinary carbon, just one atom thick, lies behind this year's Nobel Prize in Physics. Geim and Novoselov have shown that carbon in such a flat form has exceptional properties that originate from the remarkable world of quantum physics.

Graphene is a form of carbon. As a material it is completely new -- not only the thinnest ever but also the strongest. As a conductor of electricity it performs as well as copper. As a conductor of heat it outperforms all other known materials. It is almost completely transparent, yet so dense that not even helium, the smallest gas atom, can pass through it. Carbon, the basis of all known life on earth, has surprised us once again.

Geim and Novoselov extracted the graphene from a piece of graphite such as is found in ordinary pencils. Using regular adhesive tape they managed to obtain a flake of carbon with a thickness of just one atom. This at a time when many believed it was impossible for such thin crystalline materials to be stable.

However, with graphene, physicists can now study a new class of two-dimensional materials with unique properties. Graphene makes experiments possible that give new twists to the phenomena in quantum physics. Also a vast variety of practical applications now appear possible including the creation of new materials and the manufacture of innovative electronics. Graphene transistors are predicted to be substantially faster than today's silicon transistors and result in more efficient computers.

Since it is practically transparent and a good conductor, graphene is suitable for producing transparent touch screens, light panels, and maybe even solar cells.

When mixed into plastics, graphene can turn them into conductors of electricity while making them more heat resistant and mechanically robust. This resilience can be utilised in new super strong materials, which are also thin, elastic and lightweight. In the future, satellites, airplanes, and cars could be manufactured out of the new composite materials.

This year's Laureates have been working together for a long time now. Konstantin Novoselov, 36, first worked with Andre Geim, 51, as a PhD-student in the Netherlands. He subsequently followed Geim to the United Kingdom. Both of them originally studied and began their careers as physicists in Russia. Now they are both professors at the University of Manchester.

Monday, October 4, 2010

Turning Waste Heat Into Power


What do a car engine, a power plant, a factory and a solar panel have in common? They all generate heat -- a lot of which is wasted.
A "forest" of molecules holds the promise of turning waste heat into electricity. UA physicists discovered that because of quantum effects, electron waves traveling along the backbone of each molecule interfere with each other, leading to the buildup of a voltage between the hot and cold electrodes (the golden structures on the bottom and top). (Credit: Justin Bergfield, University of Arizona)

University of Arizona physicists have discovered a new way of harvesting waste heat and turning it into electrical power.

Using a theoretical model of a so-called molecular thermoelectric device, the technology holds great promise for making cars, power plants, factories and solar panels more efficient, to name a few possible applications. In addition, more efficient thermoelectric materials would make ozone-depleting chlorofluorocarbons, or CFCs, obsolete.

The research group led by Charles Stafford, associate professor of physics, published its findings in the September issue of the scientific journal, ACS Nano.

"Thermoelectricity makes it possible to cleanly convert heat directly into electrical energy in a device with no moving parts," said lead author Justin Bergfield, a doctoral candidate in the UA College of Optical Sciences.

"Our colleagues in the field tell us they are pretty confident that the devices we have designed on the computer can be built with the characteristics that we see in our simulations."

"We anticipate the thermoelectric voltage using our design to be about 100 times larger than what others have achieved in the lab," Stafford added.

Catching the energy lost through waste heat has been on the wish list of engineers for a long time but, so far, a concept for replacing existing devices that is both more efficient and economically competitive has been lacking.

Unlike existing heat-conversion devices such as refrigerators and steam turbines, the devices of Bergfield and Stafford require no mechanics and no ozone-depleting chemicals. Instead, a rubber-like polymer sandwiched between two metals acting as electrodes can do the trick.

Car or factory exhaust pipes could be coated with the material, less than 1 millionth of an inch thick, to harvest energy otherwise lost as heat and generate electricity.

The physicists take advantage of the laws of quantum physics, a realm not typically tapped into when engineering power-generating technology. To the uninitiated, the laws of quantum physics appear to fly in the face of how things are "supposed" to behave.

The key to the technology lies in a quantum law physicists call wave-particle duality: Tiny objects such as electrons can behave either as a wave or as a particle.

"In a sense, an electron is like a red sports car," Bergfield said. "The sports car is both a car and it's red, just as the electron is both a particle and a wave. The two are properties of the same thing. Electrons are just less obvious to us than sports cars."

Bergfield and Stafford discovered the potential for converting heat into electricity when they studied polyphenyl ethers, molecules that spontaneously aggregate into polymers, long chains of repeating units. The backbone of each polyphenyl ether molecule consists of a chain of benzene rings, which in turn are built from carbon atoms. The chain link structure of each molecule acts as a "molecular wire" through which electrons can travel.

"We had both worked with these molecules before and thought about using them for a thermoelectric device," Bergfield said, "but we hadn't really found anything special about them until Michelle Solis, an undergrad who worked on independent study in the lab, discovered that, low and behold, these things had a special feature."

Using computer simulations, Bergfield then "grew" a forest of molecules sandwiched between two electrodes and exposed the array to a simulated heat source.

"As you increase the number of benzene rings in each molecule, you increase the power generated," Bergfield said.

The secret to the molecules' capability to turn heat into power lies in their structure: Like water reaching a fork in a river, the flow of electrons along the molecule is split in two once it encounters a benzene ring, with one flow of electrons following along each arm of the ring.

Bergfield designed the benzene ring circuit in such a way that in one path the electron is forced to travel a longer distance around the ring than the other. This causes the two electron waves to be out of phase once they reunite upon reaching the far side of the benzene ring. When the waves meet, they cancel each other out in a process known as quantum interference. When a temperature difference is placed across the circuit, this interruption in the flow of electric charge leads to the buildup of an electric potential -- voltage -- between the two electrodes.

Wave interference is a concept exploited by noise-cancelling headphones: Incoming sound waves are met with counter waves generated by the device, wiping out the offending noise.

"We are the first to harness the wave nature of the electron and develop a concept to turn it into usable energy," Stafford said.

Analogous to solid state versus spinning hard drive type computer memory, the UA-designed thermoelectric devices require no moving parts. By design, they are self-contained, easier to manufacture and easier to maintain compared to currently available technology.

"You could just take a pair of metal electrodes and paint them with a single layer of these molecules," Bergfield said. "That would give you a little sandwich that would act as your thermoelectric device. With a solid-state device you don't need cooling agents, you don't need liquid nitrogen shipments, and you don't need to do a lot of maintenance."

"You could say, instead of Freon gas, we use electron gas," Stafford added.

"The effects we see are not unique to the molecules we used in our simulation," Bergfield said. "Any quantum-scale device where you have a cancellation of electric charge will do the trick, as long as there is a temperature difference. The greater the temperature difference, the more power you can generate."

Molecular thermoelectric devices could help solve an issue currently plaguing photovoltaic cells harvesting energy from sunlight.

"Solar panels get very hot and their efficiency goes down," Stafford said. "You could harvest some of that heat and use it to generate additional electricity while simultaneously cooling the panel and making its own photovoltaic process more efficient."

"With a very efficient thermoelectric device based on our design, you could power about 200 100-Watt light bulbs using the waste heat of an automobile," he said. "Put another way, one could increase the car's efficiency by well over 25 percent, which would be ideal for a hybrid since it already uses an electrical motor."

So, next time you watch a red sports car zip by, think of the hidden power of the electron and how much more efficient that sports car could be with a thermoelectric device wrapped around its exhaust pipe.

Funding for this research was provided by the University of Arizona physics department.

Saturday, October 2, 2010

Three Solid-State Qubits Entangled: Big Step Toward Quantum Error Correction


The rules that govern the world of the very small, quantum mechanics, are known for being bizarre. One of the strangest tenets is something called quantum entanglement, in which two or more objects (such as particles of light, called photons) become inextricably linked, so that measuring certain properties of one object reveals information about the other(s), even if they are separated by thousands of miles. Einstein found the consequences of entanglement so unpalatable he famously dubbed it "spooky action at a distance."
The quantum entanglement of three solid-state qubits, or quantum bits, represents the first step towards quantum error correction, a crucial aspect of future quantum computing. (Credit: iStockphoto/Yenwen Lu)

Now a team led by Yale researchers has harnessed this counterintuitive aspect of quantum mechanics and achieved the entanglement of three solid-state qubits, or quantum bits, for the first time. Their accomplishment, described in the Sept. 30 issue of the journal Nature, is a first step towards quantum error correction, a crucial aspect of future quantum computing.

"Entanglement between three objects has been demonstrated before with photons and charged particles," said Steven Girvin, the Eugene Higgins Professor of Physics & Applied Physics at Yale and an author of the paper. "But this is the first three-qubit, solid-state device that looks and feels like a conventional microprocessor."

The new result builds on the team's development last year of the world's first rudimentary solid-state quantum processor, which they demonstrated was capable of executing simple algorithms using two qubits.

The team, led by Robert Schoelkopf, the William A. Norton Professor of Applied Physics & Physics at Yale, used artificial "atoms" -- actually made up of a billion aluminum atoms that behave as a single entity -- as their qubits. These "atoms" can occupy two different energy states, akin to the "1" and "0" or "on" and "off" states of regular bits used in conventional computers. The strange laws of quantum mechanics, however, allow for qubits to be placed in a "superposition" of these two states at the same time, resulting in far greater information storage and processing power.

In this new study, the team was able to achieve an entangled state by placing the three qubits in a superposition of two possibilities -- all three were either in the 0 state or the 1 state. They were able to attain this entangled state 88 percent of the time.

With the particular entangled state the team achieved, they also demonstrated for the first time the encoding of quantum information from a single qubit into three qubits using a so-called repetition code. "This is the first step towards quantum error correction, which, as in a classical computer, uses the extra qubits to allow the computer to operate correctly even in the presence of occasional errors," Girvin said.

Such errors might include a cosmic ray hitting one of the qubits and switching it from a 0 to a 1 state, or vice versa. By replicating the qubits, the computer can confirm whether all three are in the same state (as expected) by checking each one against the others.

"Error correction is one of the holy grails in quantum computing today," Schoelkopf said. "It takes at least three qubits to be able to start doing it, so this is an exciting step."

Other authors of the paper include Leonardo DiCarlo, Matthew Reed, Luyan Sun, Blake Johnson, Jerry Chow and Michel Devoret (all of Yale University); and Jay Gambetta (University of Waterloo).

Saturday, September 11, 2010

Quantum Dice:Simple Device Measures Quantum Noise of Vacuum Fluctuations and Generates True Random Numbers


Behind every coincidence lies a plan -- in the world of classical physics, at least. In principle, every event, including the fall of dice or the outcome of a game of roulette, can be explained in mathematical terms.
A true game of chance: Max Planck researchers produce 
true random numbers by making the randomly varying 
intensity of the quantum noise visible. To do this, they use
a strong laser (coming from the left), a beam splitter, two 
identical detectors and several electronic components. 
The statistical spread of the measured values follows a 
Gaussian bell-shaped curve (bottom). Individual values 
are assigned to sections of the bell-shaped curve that 
correspond to a number. (Credit: MPI for the Physics of Light)

Researchers at the Max Planck Institute for the Physics of Light in Erlangen have constructed a device that works on the principle of true randomness. With the help of quantum physics, their machine generates random numbers that cannot be predicted in advance. The researchers exploit the fact that measurements based on quantum physics can only produce a special result with a certain degree of probability, that is, randomly. True random numbers are needed for the secure encryption of data and to enable the reliable simulation of economic processes and changes in the climate.

The research is published online in the journal Nature Photonics (August 29, 2010).

The phenomenon we commonly refer to as chance is merely a question of a lack of knowledge. If we knew the location, speed and other classical characteristics of all of the particles in the universe with absolute certainty, we would be able to predict almost all processes in the world of everyday experience. It would even be possible to predict the outcome of a puzzle or lottery numbers. Even if they are designed for this purpose, the results provided by computer programs are far from random: "They merely simulate randomness but with the help of suitable tests and a sufficient volume of data, a pattern can usually be identified," says Christoph Marquardt. In response to this problem, a group of researchers working with Gerd Leuchs and Christoph Marquardt at the Max Planck Institute for the Physics of Light and the University of Erlangen-Nuremberg and Ulrik Andersen from the Technical University of Denmark have developed a generator for true random numbers.

True randomness only exists in the world of quantum mechanics. A quantum particle will remain in one place or another and move at one speed or another with a certain degree of probability. "We exploit this randomness of quantum-mechanical processes to generate random numbers," says Christoph Marquardt.

The scientists use vacuum fluctuations as quantum dice. Such fluctuations are another characteristic of the quantum world: there is nothing that does not exist there. Even in absolute darkness, the energy of a half photon is available and, although it remains invisible, it leaves tracks that are detectable in sophisticated measurements: these tracks take the form of quantum noise. This completely random noise only arises when the physicists look for it, that is, when they carry out a measurement.

To make the quantum noise visible, the scientists resorted once again to the quantum physics box of tricks: they split a strong laser beam into equal parts using a beam splitter. A beam splitter has two input and output ports. The researchers covered the second input port to block light from entering. The vacuum fluctuations were still there, however, and they influenced the two partial output beams. The physicists then send them to the detectors and measure the intensity of the photon stream. Each photon produces an electron and the resulting electrical current is registered by the detector.

When the scientists subtract the measurement curves produced by the two detectors from each other, they are not left with nothing. What remains is the quantum noise. "During measurement the quantum-mechanical wave function is converted into a measured value," says Christian Gabriel, who carried out the experiment with the random generator with his colleagues at the Max Planck Institute in Erlangen: "The statistics are predefined but the intensity measured remains a matter of pure chance." When plotted in a Gaussian bell-shaped curve, the weakest values arise frequently while the strongest occur rarely. The researchers divided the bell-shaped curve of the intensity spread into sections with areas of equal size and assigned a number to each section.

Needless to say, the researchers did not decipher this quantum mechanics puzzle to pass the time during their coffee breaks. "True random numbers are difficult to generate but they are needed for a lot of applications," says Gerd Leuchs, Director of the Max Planck Institute for the Physics of Light in Erlangen. Security technology, in particular, needs random combinations of numbers to encode bank data for transfer. Random numbers can also be used to simulate complex processes whose outcome depends on probabilities. For example, economists use such Monte Carlo simulations to predict market developments and meteorologists use them to model changes in the weather and climate.

There is a good reason why the Erlangen-based physicists chose to produce the random numbers using highly complex vacuum fluctuations rather than other random quantum processes. When physicists observe the velocity distribution of electrons or the quantum noise of a laser, for example, the random quantum noise is usually superimposed by classical noise, which is not random. "When we want to measure the quantum noise of a laser beam, we also observe classical noise that originates, for example, from a shaking mirror," says Christoffer Wittmann who also worked on the experiment. In principle, the vibration of the mirror can be calculated as a classical physical process and therefore destroys the random game of chance.

"Admittedly, we also get a certain amount of classical noise from the measurement electronics," says Wolfgang Mauerer who studied this aspect of the experiment. "But we know our system very well and can calculate this noise very accurately and remove it." Not only can the quantum fluctuations enable the physicists to eavesdrop on the pure quantum noise, no one else can listen in. "The vacuum fluctuations provide unique random numbers," says Christoph Marquardt. With other quantum processes, this proof is more difficult to provide and the danger arises that a data spy will obtain a copy of the numbers. "This is precisely what we want to avoid in the case of random numbers for data keys," says Marquardt.

Although the quantum dice are based on mysterious phenomena from the quantum world that are entirely counterintuitive to everyday experience, the physicists do not require particularly sophisticated equipment to observe them. The technical components of their random generator can be found among the basic equipment used in many laser laboratories. "We do not need either a particularly good laser or particularly expensive detectors for the set-up," explains Christian Gabriel. This is, no doubt, one of the reasons why companies have already expressed interest in acquiring this technology for commercial use.