Electricity from the nose: Engineers make power from human respiration

Electricity from the nose: Engineers make power from human respiration

  8:59:00 AM    Science Lover

---

The same piezoelectric effect that ignites your gas grill with the push of a button could one day power sensors in your body via the respiration in your nose.

Graduate Student Jian Shi and Materials Science and
Engineering Assistant Professor Xudong Wang
demonstrate a material that could be used to
capture energy from respiration.

Writing in the September issue of the journal Energy and Environmental Science, Materials Science and Engineering Assistant Professor Xudong Wang, postdoctoral Researcher Chengliang Sun and graduate student Jian Shi report creating a plastic microbelt that vibrates when passed by low-speed airflow such as human respiration.

In certain materials, such as the polyvinylidene fluoride (PVDF) used by Wang’s team, an electric charge accumulates in response to applied mechanical stress. This is known as the piezoelectric effect. The researchers engineered PVDF to generate sufficient electrical energy from respiration to operate small electronic devices.



“Basically, we are harvesting mechanical energy from biological systems. The airflow of normal human respiration is typically below about two meters per second,” says Wang. “We calculated that if we could make this material thin enough, small vibrations could produce a microwatt of electrical energy that could be useful for sensors or other devices implanted in the face.”

Researchers are taking advantage of advances in nanotechnology and miniaturized electronics to develop a host of biomedical devices that could monitor blood glucose for diabetics or keep a pacemaker battery charged so that it would not need replacing. What’s needed to run these tiny devices is a miniscule power supply. Waste energy in the form or blood flow, motion, heat, or in this case respiration, offers a consistent source of power.

Wang’s team used an ion-etching process to carefully thin material while preserving its piezoelectric properties. With improvements, he believes the thickness can be controlled down to the submicron level. Because PVDF is biocompatible, he says the development represents a significant advance toward creating a practical micro-scale device for harvesting energy from respiration.

Provided by University of Wisconsin-Madison

Read More

New Drug Delivery Technique: Nanoblasts from Laser-Activated Nanoparticles Move Molecules, Proteins and DNA Into Cells

New Drug Delivery Technique: Nanoblasts from Laser-Activated Nanoparticles Move Molecules, Proteins and DNA Into Cells

  2:39:00 PM    Science Lover

---

Using chemical "nanoblasts" that punch tiny holes in the protective membranes of cells, researchers have demonstrated a new technique for getting therapeutic small molecules, proteins and DNA directly into living cells.

A field of human prostate cancer cells is shown after exposure to laser-activated carbon nanoparticles. The cell membranes have been stained red to assist in visualization. Each of the red circles is a single cell. (Credit: Credit: Prerona Chakravarty)

Carbon nanoparticles activated by bursts of laser light trigger the tiny blasts, which open holes in cell membranes just long enough to admit therapeutic agents contained in the surrounding fluid. By adjusting laser exposure, the researchers administered a small-molecule marker compound to 90 percent of targeted cells -- while keeping more than 90 percent of the cells alive.

The research was sponsored by the National Institutes of Health and the Institute of Paper Science and Technology at Georgia Tech. It will be reported in the August issue of the journal Nature Nanotechnology.

"This technique could allow us to deliver a wide variety of therapeutics that now cannot easily get into cells," said Mark Prausnitz, a professor in the School of Chemical and Biomolecular Engineering at the Georgia Institute of Technology. "One of the most significant uses for this technology could be for gene-based therapies, which offer great promise in medicine, but whose progress has been limited by the difficulty of getting DNA and RNA into cells."

The work is believed to be the first to use activation of reactive carbon nanoparticles by lasers for medical applications. Additional research and clinical trials will be needed before the technique could be used in humans.

Researchers have been trying for decades to drive DNA and RNA more efficiently into cells with a variety of methods, including using viruses to ferry genetic materials into cells, coating DNA and RNA with chemical agents or employing electric fields and ultrasound to open cell membranes. However, these previous methods have generally suffered from low efficiency or safety concerns.

With their new technique, which was inspired by earlier work on the so-called "photoacoustic effect," Prausnitz and collaborators Prerona Chakravarty, Wei Qian and Mostafa El-Sayed hope to better localize the application of energy to cell membranes, creating a safer and more efficient approach for intracellular drug delivery.

Their technique begins with introducing particles of carbon black measuring 25 nanometers -- one millionth of an inch -- in diameter into the fluid surrounding the cells into which the therapeutic agents are to be introduced. Bursts of near-infrared light from a femotosecond laser are then applied to the fluid at a rate of 90 million pulses per second. The carbon nanoparticles absorb the light, which makes them hot. The hot particles then heat the surrounding fluid to make steam. The steam reacts with the carbon nanoparticles to form hydrogen and carbon monoxide.

The two gases form a bubble which grows as the laser provides energy. The bubble collapses suddenly when the laser is turned off, creating a shock wave that punches holes in the membranes of nearby cells. The openings allow therapeutic agents from the surrounding fluid to enter the cells. The holes quickly close so the cell can survive.

The researchers have demonstrated that they could get the small molecule calcein, the bovine serum albumin protein and plasmid DNA through the cell membranes of human prostate cancer cells and rat gliosarcoma cells using this technique. Calcein uptake was seen in 90 percent of the cells at laser levels that left more than 90 percent of the cells alive.

"We could get almost all of the cells to take up these molecules that normally wouldn't enter the cells, and almost all of the cells remained alive," said Prerona Chakravarty, the study's lead author. "Our laser-activated carbon nanoparticle system enables controlled bubble implosions that can disrupt the cell membranes just enough to get the molecules in without causing lasting damage."

To assess how long the holes in the cell membrane remained open, the researchers left the simulated therapeutics out of the fluid when the cells were exposed to the laser light, then added the agents one second after turning off the laser. They saw almost no uptake of the molecules, suggesting that the cell membranes resealed themselves quickly.

To confirm that the carbon-steam reaction was a critical factor driving the nanoblasts, the researchers substituted gold nanoparticles for the carbon nanoparticles before exposure to laser light. Because they lacked the carbon needed for reaction, the gold nanoparticles produced little uptake of the molecules, Prausnitz noted.

Similarly, the researchers substituted carbon nanotubes for the carbon nanoparticles, and also measured little uptake, which they explained by noting that the nanotubes are less reactive than the carbon black particles.

Experimentation further showed that DNA introduced into cells through the laser-activated technique remained functional and capable of driving protein expression. When plasmid DNA that encoded for luciferase expression was introduced into the cancer cells, production of luciferase increased 17-fold.

For the future, the researchers plan to study use of a less expensive nanosecond laser to replace the ultrafast femtosecond instrument used in the research. They also plan to optimize the carbon nanoparticles so that nearly all of them are consumed during the exposure to laser light. Leftover carbon nanoparticles in the body should produce no harmful effects, though the body may be unable to eliminate them, Prausnitz noted.

"This is the first study showing proof of principle for laser-activation of reactive carbon nanoparticles for drug and gene delivery," he said. "There is a considerable path ahead before this can be brought into medicine, but we are optimistic that this approach can ultimately provide a new alternative for delivering therapeutic agents into cells safely and efficiently."

Read More

Carbon Sequestration: Steam Process Could Remove Carbon Dioxide to Regenerate Amine Capture Materials

Carbon Sequestration: Steam Process Could Remove Carbon Dioxide to Regenerate Amine Capture Materials

  12:55:00 AM    Science Lover

---

Because they can remove carbon dioxide from the flue gases of coal-burning facilities such as power plants, solid materials containing amines are being extensively studied as part of potential CO2 sequestration programs designed to reduce the impact of the greenhouse gas.

A relatively simple regeneration technique that could utilize waste steam to remove carbon dioxide from solid amine materials used to capture the greenhouse gas from the flue gases of coal-burning facilities. (Credit: iStockphoto/Andy Olsen)

But although these adsorbent materials do a good job of trapping the carbon dioxide, commonly-used techniques for separating the CO2 from the amine materials -- thereby regenerating them for re-use -- seem unlikely to be suitable for high-volume industrial applications.

Now, researchers have demonstrated a relatively simple regeneration technique that could utilize waste steam generated by many facilities that burn fossil fuels. This steam-stripping technique could produce concentrated carbon dioxide ready for sequestration in the ocean or deep-earth locations -- while readying the amine materials for further use.

"We have demonstrated an approach to developing a practical adsorption process for capturing carbon dioxide and then releasing it in a form suitable for sequestration," said Christopher Jones, a professor in the School of Chemical & Biomolecular Engineering at the Georgia Institute of Technology.

The research was reported online June 23, 2010 in the early view version of the journal ChemSusChem. The work was supported by New York-based Global Thermostat, LLC., a company that is developing and commercializing technology for the direct capture of carbon dioxide from the air.

Amine sorbents are often regenerated through a process that involves a change in temperature to supply the energy required to break the amine-carbon dioxide chemical bonds.

For convenience, researchers commonly remove the CO2 by heating the amine material in the presence of a flowing gas such as nitrogen or helium. That removes the carbon dioxide, but mixes it with the flowing gas -- regenerating the material, but leaving the CO2 mixed with nitrogen or helium.

Another approach is to heat the material in a carbon dioxide stream, but that is less efficient and can lead to fouling of the amine.

Jones and his team from Georgia Tech, SRI International and Global Thermostat took a different approach, heating the sorbent amine in steam at a temperature of approximately 105 degrees Celsius, causing the carbon dioxide to separate from the material. The steam can then be compressed, condensing the water and leaving a concentrated flow of carbon dioxide suitable for sequestration or other use -- such as a nutrient for algae growth.

Because most coal-burning facilities generate steam, some of that might be bled off to achieve the separation and regeneration without a significant energy penalty. "In many facilities, steam at this temperature would have no other application, so using it for this purpose would not have a significant cost to the plant," Jones noted.

The researchers studied three common formulations of the amine material: Class 1 adsorbents based on porous supports impregnated with monomeric or polymeric amines, Class 2 adsorbents that are covalently linked to a solid support, and Class 3 adsorbents based on porous supports upon which aminopolymers are polymerized in-situ, starting from an amine-containing monomer.

The adsorbents were studied through three cycles of carbon dioxide adsorption and steam-stripping. The researchers found differences in how each material was affected by the steam-stripping; performance of the most stable material actually improved, while the least stable material suffered a 13 percent efficiency decline.

"Steam-stripping is widely used in other separation processes, but has never been reported for use with supported amine materials, perhaps due to concerns about sorbent stability," Jones said. "We reported three uses of the materials in the paper and have only tested them through five or six uses, but we expect the materials could be used many more times. To be practical, the amine-containing materials need to be useful through thousands of cycles."

Pilot-scale carbon dioxide separation facilities are already in operation using amines dissolved in water. Because of the energy required to regenerate the liquid solutions, many researchers have been examining solid amines -- but the work so far has focused mostly on improving the efficiency of the materials, he added.

Though much remains to be done before solid amine materials can be used in large-scale applications, Jones believes the study demonstrates that improved materials can be developed with properties tailored for the steam regeneration process.

"We believe there is potential for development of materials that will be stable for long-term use during regeneration using this technique," he said. "This study lays the groundwork for an array of future studies that will lead to an understanding of the structural changes induced by steam-stripping."

In addition to Jones, the research team included Wen Li, Sunho Choi and Jeffery Drese from Georgia Tech, Marc Hornbostel and Gopala Krishnan from SRI International, and Peter M. Eisenberger of Global Thermostat, LLC.

Read More

New Nanogenerator May Charge IPods And Cell Phones With A Wave Of The Hand

New Nanogenerator May Charge IPods And Cell Phones With A Wave Of The Hand

  3:18:00 AM    Science Lover

---

Pictured is a schematic illustration shows the microfiber-nanowire hybrid nanogenerator, which is the basis of using fabrics for generating electricity. (Credit: Professor. Z. L. Wang and Dr. X. D. Wang, Georgia Institute of Technology.)

Imagine if all you had to do to charge your iPod or your BlackBerry was to wave your hand, or stretch your arm, or take a walk? You could say goodbye to batteries and never have to plug those devices into a power source again.

In research presented at the American Chemical Society's 237th National Meeting in Salt Lake City, Utah on March 26, scientists from Georgia describe technology that converts mechanical energy from body movements or even the flow of blood in the body into electric energy that can be used to power a broad range of electronic devices without using batteries.

"This research will have a major impact on defense technology, environmental monitoring, biomedical sciences and even personal electronics," says lead researcher Zhong Lin Wang, Regents' Professor, School of Material Science and Engineering at the Georgia Institute of Technology. The new "nanogenerator" could have countless applications, among them a way to run electronic devices used by the military when troops are far in the field.

The researchers describe harvesting energy from the environment by converting low-frequency vibrations, like simple body movements, the beating of the heart or movement of the wind, into electricity, using zinc oxide (ZnO) nanowires that conduct the electricity. The ZnO nanowires are piezoelectric — they generate an electric current when subjected to mechanical stress. The diameter and length of the wire are 1/5,000th and 1/25th the diameter of a human hair.

In generating energy from movement, Wang says his team concluded that it was most effective to develop a method that worked at low frequencies and was based on flexible materials. The ZnO nanowires met these requirements. At the same time, he says a real advantage of this technology is that the nanowires can be grown easily on a wide variety of surfaces, and the nanogenerators will operate in the air or in liquids once properly packaged. Among the surfaces on which the nanowires can be grown are metals, ceramics, polymers, clothing and even tents.

"Quite simply, this technology can be used to generate energy under any circumstances as long as there is movement," according to Wang.

To date, he says that there have been limited methods created to produce nanopower despite the growing need by the military and defense agencies for nanoscale sensing devices used to detect bioterror agents. The nanogenerator would be particularly critical to troops in the field, where they are far from energy sources and need to use sensors or communication devices. In addition, having a sensor which doesn't need batteries could be extremely useful to the military and police sampling air for potential bioterrorism attacks in the United States, Wang says.

While biosensors have been miniaturized and can be implanted under the skin, he points out that these devices still require batteries, and the new nanogenerator would offer much more flexibility. A major advantage of this new technology is that many nanogenerators can produce electricity continuously and simultaneously. On the other hand, the greatest challenge in developing these nanogenerators is to improve the output voltage and power, he says. Last year Wang's group presented a study on nanogenerators driven by ultrasound. Today's research represents a much broader application of nanogenerators as driven by low-frequency body movement.

The study was funded by the Defense Advanced Research Projects Agency, the Department of Energy, the National Institutes of Health and the National Science Foundation.

==============================================================

Adapted from materials provided by American Chemical Society, via EurekAlert!, a service of AAAS.

If you like this post, buy me a beer at $3!

Read More